Community swiping access control pendulum gate passenger car access gate configuration scheme

Wide application of the swing gate, often used for mixed people and vehicles in the community, in the actual application process often due to configuration errors occur hit the brakes or bump the bicycle and other phenomena, the correct configuration can circumvent these problems to the maximum extent.

Swing gate (place of use: places where people and vehicles are mixed)

Misuse of the program: configuration aspects

1. Wedge (without infrared delay reset)

There is no infrared sensor. After the card is swiped, only the delay set by the gate (1-60 seconds) is reset. It is impossible to judge whether the person has passed the bicycle or not. When the set time is up, no one in the channel will be forcibly closed. It is easy to bump people or bicycles and it is also easy to damage the swing arm or movement of the gate due to collision.

2.Waggate (two pairs of infrared ordinary program,) two pairs of infrared, with anti-trailing, anti reverse intrusion, induction reset function, used in people and vehicles mixed place will not have problems, but in the past In the bicycle, since the bicycle body and the person pass through the space to block the infrared, it is easy to be mistakenly judged as someone to follow and the gate machine responds to close the brake, resulting in damage to the human vehicle or damage to the gate.

3. Use vertical swing gate (320mm length) or standard bridge swing gate (1200mm length)

The position of the swipe card is too close to the length of the swing arm. When the card is swiped, it is very easy for the person to walk to the swipe card position. The front end has hit the swing arm, and the front part of the channel that has already entered the pass may be caused by blocking the infrared of the swing switch. Credit card invalid, can not open the brake situation.

Hongshun channel technology recommended configuration scheme

1. Use extended swing gate (1600mm length) +4 pairs of infrared probes above 2. Use standard swing gate (1200mm length) to add the swipe attachment column to the channel end, +4 pairs of infrared probes above. This solution reduces the bike in the channel from three aspects problem appear:

1 The chassis is lengthened, or the card swiping area is moved out through the column to avoid the bicycle hitting the swing arm when swiping the card;

24 pairs of infrared and bicycle programs are combined. Once the card is opened, the bicycle enters the channel. Any pair of infrared intermittent or uninterrupted induction channels to the channel will not be closed. In the process of closing, the infrared sensor will again Arms open twice to avoid frontal impact; avoid being caught or bumped into the swing arm while traveling in the channel.

Shenzhen Hongshun Mengmeng Co., Ltd. specializes in producing channel gates to provide you with gate gates, wing gates, swing gates, three roller gates, and full height gates. If you need to purchase, please contact customer service or call the hotline to order. We are looking forward to your arrival.

All product shells are made of stainless steel. The internal components of the box are all made of stainless steel or rust-proof and anti-corrosion treatment. They are durable and rust-proof, and have strong anti-destructive power. Smooth operation, no jitter; low noise, low power consumption, energy saving and environmental protection.